煤层顶板裂隙高位定向长钻孔安全高效抽采技术的研究与应用

放顶煤开采期间，上覆岩层受到矿压的影响，形成冒落带、裂隙带、弯曲下沉带，工作面采空区遗煤和围岩涌出的大量瓦斯飘浮在上方裂隙带区域，造成瓦斯聚集并向外涌出，形成了安全隐患，因此必须将该区域瓦斯抽出来；以往治理采空区瓦斯主要采用顶板裂隙高位钻场、顶板高抽巷等措施，但是这2种方法施工成本较高，且施工周期长，对生产接替影响较大。煤层顶板裂隙高位定向长钻孔安全高效抽采采用大功率钻机+定向钻进技术，在裂隙带施工控制整个回采范围的长钻孔，减少采空区和邻近层瓦斯向工作面空间的流动，真正实现了“以孔代巷”，既节省了成本，又缩短了工期，还提高了采空区瓦斯抽采的连续性、稳定性，减少了采空区瓦斯向外涌出，提升了瓦斯抽采效果，促进了煤矿安全高效发展。     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Inferring kinetic dissolution of NaCl in aqueous glycol solution using a low-cost apparatus and population balance model

An experimental methodology for inferring brine dissolution rate in monoethylene glycol (MEG) solutions at different temperatures using a webcam combined with a mathematical model is presented. The measurement system is designed to track the RGB (red, green, and blue) colour variations during the dissolution process. A dynamic model augmented with the population balance equation is applied to describe the dissolution process. Moreover, the dissolution rate is consistently related to the temperature and MEG concentration through the driving force based on the Gibbs energy and chemical affinity. The applied low-cost measurement apparatus proved to be a useful resource for tracking the dissolution dynamics in a wide range of undersaturation.     

Methodology for optimization of pouring variables using bottom pour for low masses of SS304 (<300 kg) in investment casting process (case study)

Bottom pour ladles with stopper rod systems are commonly used in the metal casting industry. However, stopper rod bottom-pouring systems have not yet been developed for the lower thermal masses of alloys typically used in the investment casting industry. Large thermal masses used with bottom pour systems are typically limited for ladles larger than 700 kg and to certain alloys with higher fluidity and longer solidification time like cast iron, aluminum alloys etc. In this study, bottom pour ladle designs and low thermal mass refractory systems have been developed and evaluated in production investment foundry trials with 300 kg pouring ladle. The ladles system and pouring practices used will be described along with the results from the pouring trials for SS304 that represents typical alloys used in Investment casting industries. Optimization of the variables used in an experimentation using Genetic algorithm is also explained.     

Development of mobile miniature natural gas liquefiers

With increasing consumption of natural gas (NG), small NG reservoirs, such as coalbed methane and oil field associated gas, have recently drawn significant attention. Owing to their special characteristics (e.g., scattered distribution and small output), small-scale NG liquefiers are highly required. Similarly, the mixed refrigerant cycle (MRC) is suitable for small-scale liquefaction systems due to its moderate complexity and power consumption. In consideration of the above, this paper reviews the development of mobile miniature NG liquefiers in Technical Institute of Physics and Chemistry (TIPC), China. To effectively liquefy the scattered NG and overcome the drawbacks of existing technologies, three main improvements, i.e., low-pressure MRC process driven by oil-lubricated screw compressor, compact cold box with the new designed heat exchangers, and standardized equipment manufacturing and integrated process technology have been made. The development pattern of “rapid cluster application and flexible liquefaction center” has been eventually proposed. The small-scale NG liquefier developed by TIPC has reached a minimum liquefaction power consumption of about 0.35 kW·h/Nm³. It is suitable to exploit small remote gas reserves which can also be used in boil-off gas reliquefaction and distributed peak-shaving of pipe networks.     

一种钛白粉转窑煅烧尾气余热利用新装置

钛白粉煅烧转窑尾气的高湿、高硫、高酸露点的特性使得转窑尾气余热利用过程中换热器寿命不理想。在总结已有尾气余热利用方式存在问题的基础上,提出了一种长寿命、易维护的套管式热管余热利用装置,该装置由彼此分离的换热套管通过弯头、法兰连接成为整体,尾气垂直横掠双层套管段,与高硫、高湿的尾气通过相变介质的相变完成热量由尾气向取热介质的转移,产生钛白粉生产工艺所急需的蒸汽,双层管的相变换热套管对比单层管的重力热管换热器寿命明显延长;连接换热套管的单层管弯头不与高湿、高硫尾气换热,大大减轻了尾气对单层管的腐蚀。换热器应用在3.6 m×58 m的钛白粉煅烧窑上,每年可以产生0.9 MPa的水蒸气1.12万t,为企业带来可观的经济效益。     

燃气热水器在无回水管水路中实现零冷水的方案研究

本文分析了燃气热水器行业针对无回水管水路系统实现零冷水功能的现有技术方案,指出现有技术方案存在的一些缺陷,并结合试验研究,对无回水管水路系统提出了一套全新的实现零冷水功能的技术解决方案。     

钢铁行业烟气多污染物协同控制技术应用实践

本研究分析了钢铁企业焦化和烧结两个重点工序中烟气污染物排放现状和钢铁行业当前的环保政策。对焦化及烧结烟气污染物的排放特征进行了分析，并通过对比燃煤电厂烟气特点，提出可以综合电厂烟气治理模式和自身特点改进的技术路线。结合某大型国有钢铁企业的脱硫脱硝装备对其环保现状进行了分析。针对焦化和烧结工序的典型污染物硫、硝、尘现有的源头减排、过程控制及末端处理技术，分析其优缺点。进而提出了3条可实现烟气污染物超低排放的技术路线，即半干法脱硫耦合选择性催化还原脱硝、半干法/湿法耦合臭氧氧化脱硝、活性焦脱硫脱硝一体化技术，重点介绍了这些技术在某大型钢铁企业的应用实践及应用效果。并基于全过程耦合技术，分别在焦化和烧结工序中提出了多污染物协同去除技术及应用，即焦炉低氮燃烧技术耦合末端活性焦多污染物协同控制技术、烧结烟气循环技术耦合末端活性焦多污染物协同控制技术。最后结合几种技术路线的应用实践，对未来钢铁产业的烧结及焦化工序超低排放技术的选择提出合理化建议。